Council Bill 21-2026 · Ordinance · Series of 2026 · City of Wheat Ridge

an ordinance amending Chapter 26 of the Wheat Ridge Code of Laws concerning sign and billboard regulations

In progressFirst Reading

Latest recorded action: — Listed on the City Council agenda — Ordinances on First Reading · City Council

Progress (from the official record)

What happened

The official record lists the status of Council Bill 21-2026 as “First Reading”. Its most recent recorded action was on 10/26/2026.

Rogata explainer · Based on official record

What changed

No changes have been recorded for this record since tracking began 2026-10-27.

See the full change history

Prime sponsors

Sponsor information is on the official bill page (linked below).

Official summary

Official text — shown in English exactly as published by the official source. The official text controls.

The official page for this measure does not publish a summary. Its full text is linked below.

Plain-language explainer

Plain-language explainer — not the bill text

Written by AI from the official bill text · 2026-11-20 · Human review pending

This ordinance amends Chapter 26 of the Wheat Ridge Code of Laws concerning sign and billboard regulations. It removes, adds, and revises sign-related definitions in Section 26-702, including definitions for a digital billboard and for artistic murals and sculptures, which are stated not to be signs, and it allows a restricted number of digital billboards within the City. Its current status is First Reading.

Status timeline

Every recorded action on Council Bill 21-2026, oldest first

City Council

Listed on the City Council agenda — Ordinances on First Reading

Full text — side-by-side reader

Showing the latest official version: City Council meeting packet (Laserfiche) version (official PDF),

Official text — shown in English exactly as published by the official source. The official text controls.

CITY OF WHEAT RIDGE, COLORADO INTRODUCED BY COUNCIL MEMBER Council Bill No. 21 Ordinance No. 1854 Series 2026 TITLE: AN ORDINANCE AMENDING CHAPTER 26 OF THE WHEAT RIDGE CODE OF LAWS CONCERNING SIGN AND BILLBOARD REGULATIONS

WHEREAS, the City of Wheat Ridge (the “City”) is a home rule municipality having all powers conferred by Article XX of the Colorado Constitution; and

WHEREAS, pursuant to its home rule authority and C.R.S. § 31-23-101, the City, acting through its City Council (the “Council”), is authorized to adopt ordinances for the protection of the public health, safety or welfare; and

WHEREAS, in the exercise of this authority, the City Council has previously adopted Article VII of Chapter 26 of the Wheat Ridge Code of Laws (“Code”) entitled sign code; and

WHEREAS, the Council recognizes that from time to time the City’s zoning code needs to be updated to establish standards not included in original regulations, to include modern terms and uses, and to provide clarity to City staff and the public; and

WHEREAS, the Council wishes to modernized definitions and provide clarity to other sections of Article VII of Chapter 26; and

WHEREAS, the Council wishes to allow a restricted number of digital billboards within the city; and

WHEREAS, the four (4) existing billboard owners have requested a thirty (30) day period to negotiate an equitable distribution of digital billboard licenses in lieu of an initial lottery process.

NOW THEREFORE BE IT ORDAINED BY THE CITY COUNCIL OF THE CITY OF WHEAT RIDGE, COLORADO:

Section 1. Section 26-702 of the Code regarding sign-related definitions is amended by the removal, addition, and revision of the following definitions in the appropriate alphabetical locations: Sec. 26-702. Definitions. For the purposes of this article, the following words and phrases shall have the meanings respectively ascribed to them by this section:

Ambient Light Sensor (Photocell). A control device that automatically changes the brightness of a sign based on the amount of light in the surrounding environment (e.g., dimming the sign at sunset or during a heavy storm). … Artistic mural or sculpture. A freestanding statue or sculpture or a graphic illustration or design, or an architectural design or relief applied directly to or incorporated within a wall of a building, which does not advertise or promote a particular business, service or "branded" product. Artistic Mural. A visual design, graphic, or image painted directly onto an exterior wall of a structure that is clearly separate from the business name and logo. Artistic murals are not considered signs. Business name and logo are considered Wall signs. Artistic Sculpture. A three-dimensional work of art, including but not limited to statues, reliefs, or architectural installments, that is created by shaping or combining materials such as stone, metal, wood, or glass that is clearly separate from the business name and logo. Artistic sculptures are not considered signs. … Billboard, digital. A billboard that utilizes digital display technology— including, but not limited to, Light Emitting Diodes (LEDs), Liquid Crystal Displays (LCDs), plasma screens, or similar electronic media—capable of displaying static or moving images, text, or graphics, where the message is changed through electronic or remote means. Blade sign. A sign which is affixed to any building, wall or structure and which extends beyond the building wall more than fifteen (15) inches, and which has a sign face that is generally perpendicular to the building façade. Building front. The exterior wall(s) of a building facing a public street(s) or streets or other public right-of-way other than alleys, or one (1) exterior wall containing the primary entrance to the building if not directly facing upon a public street. Candela (cd). The standard unit of luminous intensity. One candela is roughly equivalent to the light produced by a single common candle. Canopy sign. A sign mounted to a freestanding roof-like structure serving the purpose of protecting vehicles and/or pedestrians and which may be freestanding or attached to a building, is provided with supports, and that is open on all three (3) sides if attached and on all sides if freestanding. Signs on a canopy structure attached to the principal building or structure are considered Wall signs.

Changeable copy sign. A sign, either illuminated or nonilluminated, which is designed so that the message or any part of the message may be periodically changed, either mechanically or electronically, however, where a change in message occurs no sooner than every eight (8) seconds. This includes signs that utilize computer-generated messages or some other electronic means of changing copy, including displays using incandescent lamps, LEDs, LCDs or a flipper matrix. Messages shall be static and a change in message shall be instantaneous. The following shall not be considered Changeable Copy Signs: Static Data Updates: Fixed-character fields where the alphanumeric data is updated no more than four (4) times per 24-hour period (for example, a gas price sign). Functional Data Fields: A single display area not exceeding two (2) square feet that provides continuous updates of numerical data (such as time or decimal-based measurements), provided the transition is instantaneous and contains no flashing or scrolling (for example, a digital clock). … Footcandle (fc). A unit of illuminance equal to one lumen per square foot. In this code, it is used to measure Light Trespass (light falling onto a neighboring property) and Ambient Contrast (the brightness of a sign relative to its surroundings). … Lot. A tract, building site, parcel or portion of land separated from other parcels or portions by description, as on a subdivision plat of record or survey map or by metes and bounds, for the purpose of sale, lease or use. Major interior drive. A drive aisle located on private property which connects two (2) public streets or provides access to two (2) or more parcels of land or developments. Where the regulations allow "one sign per major interior drive," the intent is that the sign allowed is placed upon or facing the major interior drive, unless specifically otherwise permitted. Nit. A unit of measurement of luminance. One nit is equal to one candela per square meter. … Off-premise sign. A commercial sign advertising a land use, business, product or service not located or available as the primary business, product or service upon the premises whereon the sign is located. … Photocell (Ambient Light Sensor). A control device that automatically

changes the brightness of a sign based on the amount of light in the surrounding environment (e.g., dimming the sign at sunset or during a heavy storm). … Roof sign. A sign erected, constructed and maintained above the eaves and attached to the roof (excluding mansard roofs) of a building. … Sign face. The surface of the sign upon, against, or through which the message is displayed or illustrated. … Street frontage. For the purpose of signage, frontage upon a street is obtained by ownership, easement or leasehold and as determined by the city based on a relationship between building, lot and street only if used for vehicular access to the property, or if not used for vehicular access, only if such street frontage is at least fifty (50) feet in width. Where the regulations allow "one sign per street frontage," the intent is that the sign allowed is placed upon or facing the street, unless specifically otherwise permitted. … Size of sign. When two (2) identical sign faces are placed back to back so that both faces cannot be viewed from any point at the same time, and are part of the same sign structure, the sign area shall be computed as the measurement of one (1) of the two (2) faces. For a sign which is framed, outlined, painted or otherwise prepared and intended to provide a background for a sign display, the area and dimensions shall include the entire portion within such background or frame. For a sign comprised of individual letters, figures or elements on a wall of a building or surface of a structure, the area and dimensions of the sign shall encompass a regular geometric shape (rectangle, circle, trapezoid, triangle, etc.) or a combination of regular geometric shapes, which form or approximate the perimeter of all elements in the display, the frame and any applied background that is not part of the architecture of the building or structure. When separate elements are organized to form a single sign but are separated by open space, the sign area and dimensions shall be calculated by determining the geometric form, or the combination of forms, which comprises all of the display areas, including the space between different elements. For a freestanding sign, the sign area shall include the frame, if any, but shall not include the pole or other structural support unless such pole or structural support is internally illuminated or otherwise so designed to constitute a display, or part of a display device. Architectural features that are either part of the building or part of a freestanding structure, and not an integral part of the sign, and which may consist of landscaping, building, or structural

forms completing the site in general shall also not be in the sign area. May also be referred to as Sign area. … Traffic control and regulatory signs. Signs, signals or markings placed or erected by federal, state or local authority for the purpose of regulating, warning or guiding traffic. … Wall sign. A sign constructed of durable materials or painted and which is permanently affixed to an exterior surface of any building, wall or structure and which does not extend more than fifteen (15) inches beyond the building wall., except that sSignage placed upon awnings, marquees, or canopies attached to the principal building or structure, or signage on mansard roofs, or awnings shall also be considered as wall signs. Window or door sign. Any sign or decal affixed to, painted on, applied to, or hanging within twelve (12) inches of the interior of a window and that can be seen through the window from the exterior of the structure, but excludes merchandise included in a window display. Window signs also include signs affixed to, painted on, or applied to the exterior of a window. …

Section 2. Section 26-705 of the Code subsections D. through F. are regarding permit required is amended to read: Sec. 26-705. Permit required. D. Fees for the erection of signs are assessed as part of building permit review and issuance. Permit fees and city Building use tax will be waived where a nonconforming sign is removed and replaced by a sign conforming with these regulations. E. The property owner, principal lessee, or authorized agent of the platted or otherwise recognized as legally developable parcel on which the sign will be located shall be the same person applying for the sign permit. Documentation shall accompany the permit for verification. Building permit applications for single tenant signs on multitenant properties shall include property owner authorization with the building permit application. F. A copy sign face change or copy change with no modifications to the sign structure, support, cabinets, electricity, or other features shall be exempt from a building permit.

Section 3. Section 26-706 is amended by the removal of subsection C. and minor clarification:

Sec. 26-706. Nonconforming signs. A. Nonconforming signs. … 1. … 4.

Normal maintenance which does not require modification of the sign structure, supports or members shall be permitted. A sign face change is considered normal maintenance.

5. … B. … C. Nonconforming electronic changeable copy signs. Such signs which are made nonconforming by the adoption of ordinance no. 1641 shall be brought into conformance with the requirements of this article on or before May 11, 2019.

Section 4. Section 26-707 is amended to with edits to subsections B. and G. as follows: Sec. 26-707. General provisions/performance standards. … B.

Location of signs. 1.

All signs allowed by this article, except billboards, public signs, and signs permitted under the criteria in section 26-708 E. must be owned by the property/building owner, or principal lessee of the property/building on which the sign is placed. Refer to Sections 26710 and 26-711 for permitted sign locations on private property.

C.

G.

Illumination. 1.

In the MU-N and MU-LLC districts, illuminated signs are encouraged to be turned off when businesses are not in operation.

The nighttime illumination of changeable copy signs shall comply with Section 26-710.F. conform with the following criteria: a.

Illumination measurement methods shall be consistent with established city policy.

b.

Illumination limits. The difference between the off and solidmessage measurements using the measurement criteria shall not exceed 0.3 footcandles at night.

c.

Dimming capabilities. All permitted changeable copy signs shall be equipped with a sensor or other device that automatically determines the ambient illumination and programmed to automatically determines the ambient illumination and programmed to automatically dim according to the ambient light conditions, or that can be adjusted to comply with the 0.3 footcandle measurements.

Section 5. Section 26-708.B.2. is amended to add clarifying language as follows: Sec. 26-708. Miscellaneous provisions. … B.

Signs located on bus benches and bus stop shelters. 1.

Signs located on bus benches shall be in conformance with section 21124 of the Code.

Signs located on a bus stop shelter shall be in conformance with section 21-151 of the Code. Such signs shall be limited to two (2) sign faces per shelter with a maximum sign area of twenty-four (24) square feet per face.

Section 6. Section 26-709 is amended to update Table 1 by the removal and edits of the following rows as follows: Table 1. Permanent Signs by Land Use Type of Sign Blade Off-premise Roof Vehicle Wall or painted Window or door

Low Density Residential Use NP NP NP P L PL

Multi-Unit Residential Use NP L NP NP P P P

Nonresidential Use P NP NP L P P P

Section 7. Section 26-710 is amended to remove definitions from each of the permanent sign types, renumber as needed, add a table for freestanding signs, and update language to provide clarity and consistency as follows: Sec. 26-710. Permanent sign standards. A.

C.

Arcade signs. 1.

Definition: Any sign projecting beneath and attached to the underside of any balcony, canopy, awning or other structural overhang or passageway.

1.2. Maximum number: one (1) per business. 2.3. Maximum size: four (4) square feet. 3.4. Height: minimum height above street frontage or sidewalk level is seem seven (7) feet. 4.5. Location: may not extend above the bottom of eave, balcony, canopy, awning or other structural overhang or passageway to which it is affixed. Can extend into right-of-way with an approved right-of-way permit. D.

Barber shop poles. 1.

Definition: A sign with a striped interior which may or may not rotate, which is traditionally utilized to signify the presence an establishment within which the practice of barbering is engaged or carried out.

1.2. Maximum number: one (1) per street frontage or major interior drive. 2.3. Height: pole height cannot exceed five (5) feet in total, and may not exceed height of building to which it is attached. 3.4. Location: must be wall mounted. May extend into the right-of-way with an approved right-of-way permit. E.

Blade signs. 1.

Definition: a sign which is affixed to any building, wall or structure and which extends beyond the building wall more than fifteen (15) inches. The outermost edge of the sign shall project Projection shall extend no more than forty-eight (48) inches away from the structure to which the sign is attached.

Height:

a. May not extend above the top of the wall or parapet or; not to be roof mounted. b. … 6. Additional standards:

F.

a. Blade signs are encouraged in the traditional overlay areas, as defined by the architectural and site design manual, and in mixed-use zones. b. … e. Blade signs are allowed for multi-unit buildings but are not allowed for single-unit attached dwellings. Canopy signs.

Definition: a sign mounted to a roof-like structure serving the purpose of protecting vehicles and/or pedestrians and which may be freestanding or attached to a building, is provided with supports, and is open on three (3) sides if attached and on all sides if freestanding.

1.2. Maximum number: one (1) per street frontage or major interior drive. 2.3. Maximum size: The total allowed square footage of all canopy signs on a canopy structure shall be based on one-half (0.5) square foot for every linear foot of the canopy that faces streets or major internal drives, as determined by the community development director. Canopy signage is allowed in addition to primary building signage. canopy signs may use up to fifty (50) percent of the allowed wall sign allowance the size of the canopy sign is to be subtracted from the allowable wall signage. 3. G.

Canopy signs are permitted to be affixed to any side of a canopy.

Changeable copy signs. 1.

Definition: a sign, either illuminated or nonilluminated, which is designed so that the message or any part of the message may be periodically changed, either mechanically or electronically, however, where a change in message occurs no sooner than every eight (8) seconds. This includes signs that utilize computer-generated messages or some other electronic means of changing copy, including displays using incandescent lamps, electronic message centers (EMCs), LEDs, LCDs or a flipper matrix. Messages shall be static and a change in message shall be instantaneous.

1.2. Prohibition: changeable copy signs are not be permitted in the MU-N district, or the MU-C TOD sub-district. See section 26-1412 for changeable copy regulations in the MU-LLC district. 2.3. Maximum number: one (1) per street frontage, but no more than two (2) per development. 3.4. Maximum size: a. Nonresidential uses iIn residential zone districts, a maximum of thirtytwo (32) square feet per sign. b. Nonresidential uses iIn nonresidential zone districts, the freestanding and wall signage size regulations (subsections 26-710 J. and 26-710 M.L.) apply. 4.5. Height: a. In residential zone districts, a maximum of seven (7) feet. b. In nonresidential zone districts, freestanding and wall signage height regulations (subsections 26-710 J. and 26-710 M.L.) apply.

5.6. Location: for freestanding changeable copy signs, the minimum setback is five (5) feet from any property line. 6.7. The time lapse between changes the change in information shall not be less than eight (8) seconds. 7.

H.

The nighttime illumination of changeable copy signs shall conform with the following criteria:

a. Illumination measurement methods shall be consistent with established city policy. b. Illumination limits. The difference between the off and solid-message measurements using the measurement criteria shall not exceed 0.3 footcandles at night. c. Dimming capabilities. All permitted changeable copy signs shall be equipped with a sensor or other device that automatically determines the ambient illumination and programmed to automatically determines the ambient illumination and programmed to automatically dim according to the ambient light conditions, or that can be adjusted to comply with the 0.3 footcandle measurements. Directional signs. 1.

Definition: a freestanding or wall-type sign, not located within the public street right-of-way, providing necessary directional information to motor vehicle operators or pedestrians, such as entrance, exit, parking limitations or location of onsite buildings or facilities. Directional signs shall be clearly incidental to the primary signage on a property, in both height and sign area.

1.2. Maximum number: no limit. 2.3. Maximum size: a.

Eight (8) square feet per side; or

b. fFour (4) square feet per side if located within a required sight distance triangle. 3.4. Height: a.

If freestanding, sShall not exceed six (6) feet in height; or

b. Shall not exceed thirty-six (36) inches in height as measured from the flow line or edge of pavement if within a required sight distance triangle, or forty-eight (48) inches where outside of a sight distance triangle. I.

Flag. 1.

Definition: any fabric or other flexible material attached to or designed to be flown from a flagpole or similar device.

1.2. Maximum Height: Maximum flagpole height of thirty-five (35) feet.

J.

Freestanding signs. 1.

Definition: a sign that is permanent and self-supporting, being nondependent on support from a building or other structure, including signs placed upon fences or nonsupporting walls. This includes polemounted or monument signs.

1.2. Owner authorization required: building permit applications for single tenant signs on multitenant properties shall include property owner authorization with the building permit application. 2. Sign Height. The height shall be measured from the lowest point of the sign base to the top of the sign. In instances of significant grade difference between the site grade and adjacent sidewalk or similar feature, as determined by the community development director, the sign height may be measured from the finished grade from the nearest pedestrian walk or similar feature. 3.

Multiple signs: where multiple freestanding signs are permitted pursuant to this section, the following standards shall apply:

a. Where two (2) freestanding signs are permitted by virtue of multiple street frontages, eEach permitted sign shall be allowed to have the maximum square footage allowed as noted in this subsection. In addition, the permitted sign area allowed may be transferred from one (1) sign to another; provided, that no freestanding sign shall exceed four hundred (400) square feet in sign area. b. … 5. For low density residential uses: a. Not permitted, except for as allowed by the home occupation regulations. 6. For multi-unit dwelling uses, including single-unit attached dwellings: a. Maximum number: One (1) per street frontage, not to exceed two (2). b. Maximum size: thirty-two (32) square feet. c. Minimum setback: five (5) feet from any property line. d. Maximum height: seven (7) feet. 7. For nonresidential uses in residential zone districts: a. Maximum number: one (1) per street frontage, not to exceed two (2). b. Maximum size: thirty-two (32) square feet. c. Minimum setback: five (5) feet from any property line. d. Maximum height: seven (7) feet. 8. For nonresidential uses in nonresidential zone districts: a. Maximum number: one (1) per street frontage, not to exceed two (2). b. Maximum size: based upon table 3 below. c. Minimum setback, based upon height and adjacent zoning:

(1) Ten (10) feet if adjacent to residentially zoned properties. (2) Five (5) feet from ROW if under seven (7) feet tall. (3) Ten (10) feet from ROW if seven-fifteen feet in height. (4) Thirty (30) feet for signs over fifteen (15) feet in height. d. Maximum height: based upon zoning and location: (1) Seven (7) feet in all mixed use zone districts. (2) Fifty (50) feet for retail and service businesses within one quarter (¼) mile of an interstate highway measured from the property line. (3) Fifteen (15) feet for all other freestanding signs. 5. Freestanding signs for the following uses shall comply with the standards in Table 3:

Use Type Low-density residential uses Multi-unit residential uses Nonresidential uses in residential zone districts

Nonresidential uses in nonresidential zone districts

Table 3. Freestanding Sign Standards by Use Type Min. Setback Max. Height Max. Number Max. Size (sf) from ROW (ft.) (ft.)2 1 nonilluminated 2 sf 0 ft. 4 ft. sign1 32 sf

5 ft.

7 ft.

32 sf

5 ft.

7 ft.

1 per street frontage, maximum 2 per development

5 ft. for signs ≤7 ft. in height;

Per Table 4

10 ft. for signs > 7 ft. to ≤15 ft. in height; 30 ft. for signs > 15 ft. in height

Mixed Use districts: 7 ft. Retail/Service business within ¼ mile of an interstate highway3: 50 ft. All other: 15 ft.

1. For home occupations only; refer Section 26-613. 2. 10 ft. side/rear setback also required when adjacent to a residentially zoned property. 3. Measured from the property line to the interstate right-of-way.

Table 43. Maximum sign area for freestanding signs for nonresidential NONRESIDENTIAL uses in nonresidential zone districts Floor Area of Building* Single Tenant Sign Multiple Tenant Sign 0—1,500 square feet 35 square feet 60 square feet 1,501—5,000 square feet 35 square feet plus 1 60 square feet plus 1 square foot per each square foot per each additional 50 square feet additional 40 square feet of floor area over 1,501. of floor area over 1,501. 5,001—50,000 square feet 100 square feet plus 1 150 square feet plus 1 square foot per each square foot per each 300 additional 500 square foot square feet of floor area of floor area over 5,001. over 5,001. Over 50,001 square feet 190 square feet plus 1 300 square feet plus 1 square foot per each square foot per each additional 1,000 square additional 1,000 square feet of floor area over feet of floor area over 50,001 up to a maximum 50,001 up to a maximum size of 300 square feet size of 400 square feet *In computing allowable sign size, only the footprint of the principal building structure can be used. The floor area of any freestanding canopies or accessory structures on the property gas station canopies and drive-thru canopies cannot be applied toward the freestanding sign allowance. 9.

Home occupations:

a. Must be in compliance with section 26-613 of the Municipal Code. b. Must have an approved business license through the city. c. Permitted one (1) non-illuminated sign not to exceed two (2) square feet in size. 6.10.3D signs: three-dimensional (3D) signs, as defined in section 26-702, are permitted the sign allowances listed in this subsection multiplied by one and seventy-five one-hundredths (1.75), as measured in cubic feet. K.

Sign oriented to a drive-through lane. 1.

Definition: a freestanding or wall-mounted sign, oriented predominantly towards a drive-through or drive-up lane, which is clearly incidental to the primary signage on a property, in both height and sign area.

1.2. Maximum size: thirty-five (35) square feet per drive-through lane 2.3. Maximum height: six (6) feet 3.4. Additional standards a. May be illuminated by internal lighting only.

L.

b. Must be screened from the right-of-way such that signs do not violate subsection 26-707 D. Traffic control or and regulatory signs. 1.

Definition: signs, signals or markings placed or erected by federal, state or local authority of the purpose of regulating, warning or guiding traffic

1.2. Location: may be placed by the federal, state or local authority within the public right-of-way. M. Wall or painted signs. 1.

The purpose of these regulations is to establish a maximum size allowance and to allow flexibility in wall sign location. Definition: a sign constructed of durable materials which is permanently affixed to an exterior surface of any building, wall or structure or painted directly on the exterior surface of a building, wall or structure which does not extend more than fifteen (15) inches beyond the building wall, except that signage placed upon marquees, canopies or awnings shall be considered wall signs.

Maximum size:

a. Single tenant building allowance. The total allowed square footage of all wall signs on a building shall be based on one (1) square foot for every linear foot of the walls that face streets or major internal drives, as determined by the community development director. Total size for any single or combined wall sign is no larger than one (1) square foot for every linear foot of the side of the building to which it is affixed. b. Multiple tenant building allowance. The total allowed square footage of tenant signs on a multiple tenant building shall be based on one (1) square foot for every linear foot of the tenant’s space that faces streets or major internal drives, as determined by the community development director. c. No individual wall sign shall exceed one and one-half (1.5) the size allowed by the length of the wall it is placed upon. 3.3. Location: a. Signs may only be affixed to walls which face public streets or major interior drives, as determined by the community development director Wall signs are permitted to be affixed to any exterior wall of the building. b. For buildings with flat roofs, wall signs shall not extend above the top of the parapet wall. c. For buildings with mansard roofs, wall signs shall not extend above the top of the mansard roof by more than three (3) feet., and if placed upon a parapet or mansard shall not extend more than three (3) feet above the deck line.

d. The community development director may approve a roof sign, in lieu of a wall sign, in limited circumstances where there is not another visible or practical location for a wall sign, such as on a small kiosk. e.c. For uses which have a rear entry or rear delivery door, one (1) nonilluminated wall sign not to exceed four (4) square feet per tenant is permitted. 4. Other: signs affixed to canopies shall be considered wall signs and shall be calculated based upon the length of the wall to which they are attached or adjacent. 4.5. Home occupations: a. … 5.6. Additional standards:

N.

a. Building wWall signs shall complement the building's architecture and fit within the architectural features of the façade so they do not overlap windows or columns. Window or door signs. 1.

Definition: any sign or decal affixed to, painted on, applied to, or hanging within twelve (12) inches of the interior of a window and that can be seen through the window from the exterior of the structure, but excludes merchandise included in a window display.

1.2. Maximum size: sign shall not obstruct more than twenty-five (25) percent of the door or window area 2.3. Additional standards: a. … c. Exterior applied window signs shall be made of durable materials appropriate for Colorado’s climate, such as vinyl, and maintained in good condition at all times. d. Exterior window signs are allowed only if the interior of the window is inaccessible by the tenant.

Section 8. Section 26-711 is amended to remove definitions within the sign types, renumber as needed, and provide clarification as follows: Sec. 26-711. Temporary sign standards. A.

B.

Balloon or inflatable. 1.

Definition: any sign consisting of material intended to be filled with air or helium, or have air blown through in order to create a visual attraction; this is inclusive of air dancers, inflatables caricatures, all types and sizes of balloons, and similar devices.

1.2. Height: cannot exceed twenty-five (25) feet above existing grade. 2.3. Location: may not be located within the public right-of-way. 3.4. Additional standards: C.

a. … Banner. 1.

Definition: a sign or advertising display constructed of cloth, canvas, fabric or other light material that is mounted with no enclosing framework intended to be displayed for a short period of time.

1.2. Maximum size: … 2.3. Location: may be placed upon a building wall but shall not be attached to fencing, landscaping, freestanding posts or utility poles. Banners may be placed only on walls facing a public street or major interior drive. 3.4. Other: … D.

Pennant, streamer, and other similar device. 1.

Definition: a sign made of flexible materials intended to create a visual attraction through movement. This is inclusive of flutter flags.

1.2. Location: … F.

Portable. 1.

Definition: any sign which is supported by one (1) or more uprights or braces upon the ground and which is of portable design, such as Aframe or pedestal style signs.

1.2. Maximum size: … 2.3. Setback: … 3.4. Location: … G.

Signs carried by persons. 1.

Definition: any sign, which is carried or worn by any person, typically in or along the right-of-way for the purpose of attracting and directing traffic to a particular place of business.

1.2. Maximum size: … 2.3. Location: … H.

Yard—Small. 1.

Definition: a temporary, ground-mounted, portable sign constructed of paper, vinyl, plastic, wood, metal or other comparable material, and designed or intended to be displayed for a limited period of time.

1.2. Maximum number: … 2.3. Maximum size: shall not exceed four (4) square feet in size per sign. 3.4. Location: … I.

Yard—Large. 1.

Definition: a temporary, ground-mounted, portable sign constructed of paper, vinyl, plastic, wood, metal or other comparable material, and designed or intended to be displayed for a limited period of time.

1.2. Maximum number: … 2.3. Maximum size: a. … c. For nonresidential uses: thirty-two (32) square feet. 3.4. Minimum setback: … 4.5. Maximum height: shall not exceed seven (7) feet in height. 5.6. Location: …

Section 9. Section 26-712 is amended to add a new subsection D. regarding regulations for digital billboards, renumbered as needed, and to clarify language therein: Sec. 26-712. Billboards; specifications and regulations. A.

General provisions. … 2.

Billboard district. For the purpose of this section, the city has one (1) billboard district, as shown on the official billboard district zoning map of the city, Figure 26-712.1, and incorporated herein, as shown below as the shaded area.

Official Billboard Zoning District Map

3. B.

C.

Maximum number of billboards permitted. 1.

When a billboard is fully abandoned, as described in subsection G.F., below, the maximum number of billboards within the city shall automatically be reduced accordingly.

Design standards. 1.

Changeable copy billboard signs are not allowed.

2.3. Billboards shall be located within two hundred and fifty (250) feet of a highway, excluding on- and off-ramps, as measured radially from the leading edge of the billboard to the closest edge of the highway rightof-way line. 3.4. Structure setbacks shall be as required for a principal structure in the zoning district where the billboard is located and shall be measured perpendicularly from the property line to the leading edge of the billboard or structure, whichever is closest. 4.5. All replacement billboards shall be of the pedestal type, unless prohibited by soil conditions as certified by a professional engineer. As used herein, "pedestal" type signs are freestanding signs supported by one (1) or more columns, poles, or support structures. 5.6. The maximum sign face size for a single-sided, two-sided, or V-shaped sign with an angle of less than sixty (60) degrees shall not exceed seven hundred fifty (750) square feet per sign face. For V-shaped signs with greater than a 60-degree angle, the combined size of both sign faces shall not exceed seven hundred fifty (750) square feet, and the total length of both sign faces shall not exceed six (6) times the height of the sign face. 6.7. The maximum height to the highest point of the billboard shall not exceed thirty-two (32) feet. D.

Digital billboards. 1. Up to four (4) of the 15 previously permitted billboards may convert one (1) face each to a digital billboard. 2. The size, height, orientation, and location of each converted billboard face shall remain unchanged from its previously permitted configuration. 3. There shall be at least 2,500 feet between digital billboards oriented in the same direction within the city, including from existing digital

billboards in adjacent jurisdictions, as measured in a straight line from the closest point of the support structure. 4. Illumination a. Nighttime luminance of the digital display shall not exceed 250 candelas per square meter (cd/m²), or nits, as measured at the surface of the display with a luminance meter oriented perpendicular to the sign face. The city may request a billboard sign owner to provide evidence this measurement is being met. b. The difference between the "off" and "solid-message" measurements shall not exceed 0.3 footcandles when measured at a distance determined by the formula: Distance = square root of (Area of Sign Face x 100). c. All permitted digital billboard shall be equipped with a functional photocell or ambient-light sensor that automatically adjusts brightness in real-time according to ambient light conditions (e.g., sunset, heavy cloud cover). 5. Digital billboards shall use utilize shielding technology, such as strategically placed louvers or optically down-angled LEDs, to direct illumination only toward the intended viewing audience. 6. Digital display. a. All parts of a digital message shall remain static. b. Messages may be changed no sooner than every ten (10) seconds. c. Copy changes shall be instantaneous and shall not include motion, animation, flashing, fading, or any special effects. 7. Location selection process. The permitted digital billboard locations will be determined through a lottery process, as follows: a. If an abandonment or other event results in fewer than the maximum permitted number of digital billboards to be located within the city under Section 26-712.D.1, , the city shall declare that a vacancy exists and publish notice of the vacancy on the city's website and post such notice at the city's official posting places. The determination and declaration of a vacancy shall be in the city's sole and absolute discretion. The notice of vacancy shall provide that interested parties must file a preliminary application with the city within thirty (30) days of the date of notice. b. The city shall accept preliminary applications from interested parties for thirty (30) days from the date of the notice of vacancy. Preliminary applications must include, at a minimum, the following information: i.

A letter of intent from the applicant;

ii.

The proposed location of the billboard, including either property address or assessor parcel identification number; and

iii.

Written permission of the property owner to locate the billboard, if the property owner is not the named applicant.

c. The community development director will determine whether preliminary applications are complete and proposed locations are eligible pursuant to chapter 26 of the code of laws. d. In the event more than one complete and eligible preliminary application is timely filed, the city shall select one preliminary application to continue processing by lottery. All potential applicants in the lottery shall be notified of the time and place that lots shall be drawn and may attend and observe the process . If the city does not receive any preliminary applications within the initial thirty (30) day response period, the city shall maintain the notice of vacancy on the city's website. The notice of vacancy shall be amended to reflect that the initial response period has lapsed and that preliminary applications will now be accepted and processed by the city in the order received . If more than one preliminary application is thereafter received by city on the same date , the lottery process set forth above shall be used to select one application to continue processing . e. The sole or selected applicant must file a complete building permit application within one hundred eighty (180) days of: i. The date the applicant is selected by lottery, if so selected; ii. The expiration of the initial thirty (30) day response period if the applicant is the only party that has filed a timely letter of intent; or iii. The date of the applicant's preliminary application if submitted after the initial thirty (30) day response period; provided, however, that the community development director may authorize an extension of not more than one hundred eighty (180) additional days upon a showing by the applicant that it is making substantial progress towards filing a complete application , as determined by the director in his or her sole and absolute discretion . f. An applicant's failure to meet deadlines or to timely file materials and information necessary to comply with the permit process , as determined by the community development director in their sole and absolute discretion , shall result in the rejection of his or her application and the generation of a new notice of vacancy, in accordance with paragraph (a.) above. 8.

Public Service Access

a. As a condition of any permit for the conversion of a static billboard to a digital display, the billboard owner shall enter into a public benefit agreement with the city. This agreement shall include, but is not limited to, the following operational requirements: i. Non-Commercial Message Slot: The billboard owner shall provide the city with one (1) dedicated message slot within every standard rotation loop at no cost to the city for noncommercial, public service use. ii. Emergency Override: The city shall have the right to immediate and total access to the digital display for the purpose of broadcasting emergency alerts (e.g., Amber Alerts or imminent weather hazards). Emergency messaging shall supersede all scheduled commercial copy for the duration of the alert. iii. Content Management: The city’s city manager or their designee shall provide the digital creative. The billboard owner shall upload and display such messaging within twenty-four (24) hours of receipt, or within one (1) hour for emergency alerts. E.D. Maintenance. … F.E. Temporary removal and replacement. 1.

Failure to comply with any of the conditions under which temporary removal is permitted under subsection EF.1., above, shall be considered abandonment.

G.F. Abandonment. 1.

A billboard may be deemed fully abandoned if one (1) of the following occurs: a. … b. Following notice from the city based on failure of the billboard owner to adequately maintain the sign pursuant to subsection E.D., above; c. Following notice from the city based on repeated failure of the billboard owner to adhere to the regulations contained herein; or d.c. Removal without following the temporary removal and replacement process outlined in subsection F.E., above.

Section 10. Initial application process. Within thirty (30) days of the effective date of this ordinance and in lieu of an initial lottery process, the four billboard owners within the city may submit preliminary applications proposing an equitable distribution of digital billboard conversions that collectively meet the requirements of Section 26712. The contents of a preliminary application are provided in Section 26-712.D.7.b. After this deadline, the lottery provisions of Section 26-712 shall apply. Notwithstanding

the foregoing, the city shall have final determination of the allowed locations and may at any time open the lottery process.

Section 11. Severability, Conflicting Ordinances Repealed. If any section, subsection or clause of this Ordinance shall be deemed to be unconstitutional or otherwise invalid, the validity of the remaining sections, subsections and clauses shall not be affected thereby. All other ordinances or parts of ordinances in conflict with the provisions of this Ordinance are hereby repealed.

Section 12.

Effective Date. This Ordinance shall take effect immediately.

INTRODUCED, READ, AND ADOPTED on first reading by a vote of ___ to ___ on this 26th day of October 2026, ordered published in full on the City’s website as provided by the Home Rule Charter, and Public Hearing and consideration on final passage set for November 9, 2026, at 6:30 p.m., in the Council Chambers, 7500 West 29th Avenue, Wheat Ridge, Colorado. READ, ADOPTED AND ORDERED PUBLISHED on second and final reading by a vote of ___ to ___, this 9th day of November 2026. SIGNED by the Mayor on this _____ day of ____________, 2026.

___________________________________ Korey Stites, Mayor ATTEST: ____________________________ Janeece Hoppe, City Clerk

Approved as to Form: ___________________________________ Gerald Dahl, City Attorney

First Publication: October 27, 2026 Second Publication: November 10, 2026 Effective Date: November 9, 2026 Published: Jeffco Transcript and www.ci.wheatridge.co.us

Change history

Official record

City of Wheat Ridge — City Council agenda packets, Laserfiche WebLink (weblink.ci.wheatridge.co.us)

Source: City of Wheat Ridge — City Council agenda packets, Laserfiche WebLink (weblink.ci.wheatridge.co.us) · Data as of

Verify this record

This record carries a fingerprint of its official content, computed by our data pipeline with the SHA-256 algorithm — a real computation over the record itself, not a badge we award ourselves. Anyone can recompute it from the official source and compare.

SHA-256 fingerprint

7961a0f157ef4bb488567503f0987cb815948784124cb35e7c15355afa14ac2e

What it covers: the record exactly as the official source publishes it — its identifiers (bill number, session, jurisdiction), its official title and long title, its official summary, its status, its sponsors in published order, every recorded action, every recorded vote, and the link to each official text version — assembled in a fixed canonical form described on the How this data works page.

Computed 2026-11-21 · Algorithm: SHA-256 · Canonical form: rogata-canonical-v1

Source: City of Wheat Ridge — City Council agenda packets, Laserfiche WebLink (weblink.ci.wheatridge.co.us) · Data as of

The fingerprint does not cover our retrieval date (the “Data as of” stamp in the source line): re-fetching unchanged official content produces the same fingerprint, while any change to the official content changes it.

If you recompute the fingerprint from the official source and get a different value, one of us is out of date — please report it through the corrections log.